Nozzles
Aero NozzlesCold Jet’s Aero nozzles are designed to maximize performance whatever the application. Broad or precise cleaning, hard to reach areas or working in a confined space, our line of nozzles will exceed your expectations. Recommended operating parameters are shown in the tables for each nozzle. Nozzles noted with (*) are recommended for use where blasting pressure is >140 psi (9.7 bar). Recommended accessory handle is noted where applicable. Low and Standard Flow NozzlesThese straight nozzles have standard air consumption rate of 100 cfm or less at 80 psi.
|
High Flow NozzlesThese straight nozzles have air consumption rate of more than 100 cfm at 80 psi.
|
Variable Fragmenting MERN NozzlesWith patented MERN technology and new variable fragmenting technology you have the power to control aggression downstream of the nozzle throat for a full range of performance with maximum effectiveness - the most ever from a single nozzle.
|
Specialty NozzlesThese nozzles have various configurations for special applications and operate with air consumption rates as noted.
|
Nozzle Extension TubesExtension tubes are used to extend nozzles when additional reach is needed with minimal pressure loss. Extension tubes connect to nozzle and applicator with proper fittings (not included).
|
Nozzle AccessoriesExtension tubes are used to extend nozzles when additional reach is needed with minimal pressure loss. Extension tubes connect to nozzle and applicator with proper fittings (not included).
|
Applicators
|
Blast Hose** One corresponding Bond Cable Shaft Collar is required per complete hose run (not one per section)
|
Hoses, Cables and Connectors
|
Hoses, Cables and Connectors
|
Filters and Regulators
|
